Professional Dairy Processing Equipment Milk Tanker Truck 3-40 Cubic Volume

Milk Tank Vehicle Dairy Processing Equipment SUS304 stainless steel

Description of Milk Tank Vehicle Dairy Processing Equipment

Milk tank vehicle's the inner and outer tank body is made of stainless steel 304, and can be made into 2-4 cabin. There is a washer in the tank. The middle layer is heated by polyurethane foam material with 50-80 mm, and the temperature change is not more than 1 degrees at 24 hours when the temperature is 30 degrees.

Generally, the tank body of milk tank car uses polyurethane foam, and the tank body is surrounded by 80-100mm thick insulation layer. It can not only get good thermal insulation performance, but also enhance the strength of the tank. The heat preservation of polyurethane foam is not more than 2 centigrade for 24 hours at normal temperature, the insulation performance is more reliable, and the connection strength between the outer cover of the tank and the inner liner is ensured. Built-in cleaning sprinkler for cleaning within a radius of 5-10 meters.

Parameter of Milk Tank Vehicle Dairy Processing Equipment

• 1. The volume of the tank is 3-40 cubic.
• 2.The inner liner is made of 3mm stainless steel plate. It is smooth and clean without sharp angle, and can be divided into storehouse design.
• 3. The middle with 8cm thick polyurethane insulation materials, to ensure that within 24 hours the temperature drop no more than 1℃ during the transportation .
• 4.Tanks are automatically cleaned with CIP, and the ball is rotated at 360 degrees to ensure no dead angle.
• 5. The top of the tank is equipped with a ventilation valve to prevent the tank from deforming due to positive and negative pressure.

dairy products manufacturing machinery

dairy manufacturing equipment

Professional Dairy Processing Equipment Milk Tanker Truck 3-40 Cubic Volume Images